HOLZMA Bargstedt - HPP 350 TPB; Saw blade overlap 80 mm Saw carriage feed: forward 1-150 m / min Backwards constant 150 m / min Program fence speed: Forward 90 m / min Backwards 90 m / min (In EU countries forward = 25 m / min) Automatic pressure bar height control yes Automatic cut-off yes Adjustable pressure bar contact pressure yes Adjustable collet clamping pressure yes Completely moistened machine table (saw body) yes aligners minute pressing width 0 mm Max. Pressing with Complete cutting length Main engine 13.5 kW Scoring saw motor 2.2 kW Operating voltage 400 V (+ 10% / - 5%) / 50 Hz Electrical connection value for HS motor: 13.5 kW = 20 kW Working height 920 mm Main saw blade 350 x 4.4 x 60 mm Scoring saw blade 180 x 4.4 - 5.4 x 45 mm Required air pressure 6 bar Compressed air requirement 150 NL / min Volume at the exhaust connection approx. 26 m / s Low pressure min. 1200 Pa Exhaust air volume 3800 cbm / h Suction connection Chip channel 1 piece 180 mm Suction connection pressure bar 1 piece 150 mm; Automatic vacuum feeding portal to Continuous feeding of small and small Large format plates. TBP200 contains the following components: - 1 vehicle carrier - 2 portal supports or archway - 1 shearing right - 1 suction traverse including 4 separators And 5 holding suction cups Protection of the system by protective fence And safety light barrier Technical specifications Panel format max: 4150 x 2200 mm Board format min.: 2600 x 1800 mm Plate thickness: 12-40 mm Max weight of the panel board: 250 kg Material: suckable and separable Power from the first stacking station (Material-dependent): approx. 2 cycles / min Accuracy: +/- 20 mm
Price on Request
